Classic Type Gas Deck Oven For Baking

YCD-2D electric theory diagram

ZQ—four-pole electromagnetic buckle switch

FU–fuse

K1~K3–boat-shape switch

SC0—heat breaker (200v)

R1, R2–heating element (110V)

EL–electric light

SC1, SC2–temperature controller (220V)

KM1, KM2–AC contactor (220V~)

GET PRICING

About Deck type gas oven for baking

1.YCQ Series Digital panel

1.Available for LPG or LNG

2.Can add lava stone and steam function for baking basic on customer’s requirement

3.The fire pipe is made of high grade seamless steel tube. Light fire baking mode with high thermal efficiency and energy saving.

 

2.YCQ Series Micro-Computer Panel

1.Micro-computer control panel, comprehensive function,some functions can be adjusted accurately

  1. Automatic temperature control system,which make the baking environment in the best state.

3.We offer Deck type gas oven with factory price.

 

Specification of gas deck oven for sale

Model Specification POWERKW Voltage Dimension L*W*HMM N.W.(KG)
YCQ-2D 1 DECK  2 Tray 0.1 KW 220v 1330x860x675mm 105
YCQ-2-4D 2 DECK  4 Tray 0.2 KW 220v 1330x860x1495mm 180
YCQ-3-6D 3 DECK  6 Tray 0.3 KW 220v 1330x860x1730mm 260
YCQ-3D 1 DECK  3 Tray 0.1 KW 220v 1765x860x675mm 120
YCQ-3-9D 3 DECK  9 Tray 0.3 KW 220v 1765x860x1730mm 310
YCQ-3-12D 3 DECK  12 Tray 0.3 KW 220v 1765x1060x1730mm 440

 

 Gas oven for baking Operation

  1. On the display board, “OFF” or “O” stands for power disconnecting; “ON” or”I” stands for power connecting.
  2. Firstly, turn on the switch of the power supply and LPG. Secondly set the controller of the display board to “O”. Thirdly, turn on each layer’s power supply switch. For the safety of first ignition, open the door of the oven in advance. After finishing ignition, you can close the door of the oven.
  3. Clockwise rotate the thermostat knob to setup the temperature. When the heating pilot is glowing into green, the oven is starting heating. When the set temperature is reached, it may extinguish the fire automatically, and the red light will be on which explains the heating is stopped. As long as the temperature of the oven inside is getting lower than the set temperature, the oven will start igniting again and keep it constant. Continuously repeating the process like this, the oven can maintain the set temperature.
  4. After setting the temperature, the oven still fails to be ignited over three times, which will causes that the Solenoid valve stops, an alarm is given out and the red light glows. In this case, you should open the door of the oven and turn off the power supply on the thermostat display board. After 30 minutes later, try to turn on the power supply and check it out the ignition.
  5. After ignition, inspect the flame.
    1. If the flame is light green, it shows normal and burning fully.
    2. If the flame is red and dark green, it means the burning is not so fully.
    3. If the flame is moving, it shows the wind is too strong.

Remark: If the flame is showing abnormal, you should adjust the wind making machine till the frame is getting normal. The suitable wind delivery can bring the perfect effect of the frame and baking.

  1. If you choose the automatic temperature control function, turn the thermostat knob to set the baking temperature. Timed baking is also available. You may set the baking time according to requirements. When an alarm is given out, the oven stops heating. Turn the timing switch to “OFF”, the alarm stops.
  2. Pulling the tension bar is to open the exhaust port. Pushing the tension bar is to shut the ventilating entrance.
  3. Finish baking, rotate the thermostat knob and adjust the temperature back to “O”. Remember to turn off the power supply of the oven and LPG for safety before leave.

9、Steam function:When you need steam, press the “atomization button ” , then the machine will injet steam full of the chamber. Twiddle the “ato mization amount adjustment button” which can control the atomization amount , twiddle clockwisly, the amplify , on the contrary, then reduce.

Our Service

1.To satisfy one-stop convenience for our client, our company presented service of matching kitchen equipment.
2.We offers OEM & ODM services. Our company has strong ability to design and manufacture, with more than 13 years of business experience.
3.Customized according to the different needs of customers, such as the energy consumption of diesel, electric and gas.
4.We can offer the spare parts according to your order. One year warranty.
5.You have flexibility to choose the payment terms that work best for your budget.
6. We offers profession consultancy and solution to customers.
7. Packed in protective wooden case to ensure the safety of transportation. All our product can be packed as you need.
8.With CE & ISO9001 certification.
8.Factory direct sale price. Quality assurance.

Seng Inquiry To Us

    Product Details

    About Deck type gas oven for baking

    1.YCQ Series Digital panel

    1.Available for LPG or LNG

    2.Can add lava stone and steam function for baking basic on customer’s requirement

    3.The fire pipe is made of high grade seamless steel tube. Light fire baking mode with high thermal efficiency and energy saving.

     

    2.YCQ Series Micro-Computer Panel

    1.Micro-computer control panel, comprehensive function,some functions can be adjusted accurately

    1. Automatic temperature control system,which make the baking environment in the best state.

    3.We offer Deck type gas oven with factory price.

     

    Specification of gas deck oven for sale

    Model Specification POWERKW Voltage Dimension L*W*HMM N.W.(KG)
    YCQ-2D 1 DECK  2 Tray 0.1 KW 220v 1330x860x675mm 105
    YCQ-2-4D 2 DECK  4 Tray 0.2 KW 220v 1330x860x1495mm 180
    YCQ-3-6D 3 DECK  6 Tray 0.3 KW 220v 1330x860x1730mm 260
    YCQ-3D 1 DECK  3 Tray 0.1 KW 220v 1765x860x675mm 120
    YCQ-3-9D 3 DECK  9 Tray 0.3 KW 220v 1765x860x1730mm 310
    YCQ-3-12D 3 DECK  12 Tray 0.3 KW 220v 1765x1060x1730mm 440

     

     Gas oven for baking Operation

    1. On the display board, “OFF” or “O” stands for power disconnecting; “ON” or”I” stands for power connecting.
    2. Firstly, turn on the switch of the power supply and LPG. Secondly set the controller of the display board to “O”. Thirdly, turn on each layer’s power supply switch. For the safety of first ignition, open the door of the oven in advance. After finishing ignition, you can close the door of the oven.
    3. Clockwise rotate the thermostat knob to setup the temperature. When the heating pilot is glowing into green, the oven is starting heating. When the set temperature is reached, it may extinguish the fire automatically, and the red light will be on which explains the heating is stopped. As long as the temperature of the oven inside is getting lower than the set temperature, the oven will start igniting again and keep it constant. Continuously repeating the process like this, the oven can maintain the set temperature.
    4. After setting the temperature, the oven still fails to be ignited over three times, which will causes that the Solenoid valve stops, an alarm is given out and the red light glows. In this case, you should open the door of the oven and turn off the power supply on the thermostat display board. After 30 minutes later, try to turn on the power supply and check it out the ignition.
    5. After ignition, inspect the flame.
      1. If the flame is light green, it shows normal and burning fully.
      2. If the flame is red and dark green, it means the burning is not so fully.
      3. If the flame is moving, it shows the wind is too strong.

    Remark: If the flame is showing abnormal, you should adjust the wind making machine till the frame is getting normal. The suitable wind delivery can bring the perfect effect of the frame and baking.

    1. If you choose the automatic temperature control function, turn the thermostat knob to set the baking temperature. Timed baking is also available. You may set the baking time according to requirements. When an alarm is given out, the oven stops heating. Turn the timing switch to “OFF”, the alarm stops.
    2. Pulling the tension bar is to open the exhaust port. Pushing the tension bar is to shut the ventilating entrance.
    3. Finish baking, rotate the thermostat knob and adjust the temperature back to “O”. Remember to turn off the power supply of the oven and LPG for safety before leave.

    9、Steam function:When you need steam, press the “atomization button ” , then the machine will injet steam full of the chamber. Twiddle the “ato mization amount adjustment button” which can control the atomization amount , twiddle clockwisly, the amplify , on the contrary, then reduce.

    Service

    Our Service

    1.To satisfy one-stop convenience for our client, our company presented service of matching kitchen equipment.
    2.We offers OEM & ODM services. Our company has strong ability to design and manufacture, with more than 13 years of business experience.
    3.Customized according to the different needs of customers, such as the energy consumption of diesel, electric and gas.
    4.We can offer the spare parts according to your order. One year warranty.
    5.You have flexibility to choose the payment terms that work best for your budget.
    6. We offers profession consultancy and solution to customers.
    7. Packed in protective wooden case to ensure the safety of transportation. All our product can be packed as you need.
    8.With CE & ISO9001 certification.
    8.Factory direct sale price. Quality assurance.

    Contact

    Seng Inquiry To Us